PipPosition
Sample Distribution Charts
Color Distribution
Material Distribution
Origin Distribution
| Photo | Generation | Molds | PipStyle | BottomStyle | InsideLogoOrientation | InsideLogoStyle | MoldIdentificationLayout | PatPendLayout | PatPendStyle | StudRecessStyle | StudLogoStyle | InsideRibStyle | MoldPositionStyle | MoldPositionLayout |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
01 - Automatic Binding Bricks | 1 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | None | None | Lengthwise | None | None |
 |
02 - Large logo - lengthwise ribs | 1 | Single Cornered Narrow Bottom Edge | None | Left To Right | Bold Blockletters | None | None | None | None | None | Lengthwise | None | None |
 |
03 - Large logo - ribs across | 5 | Single Cornered Narrow Bottom Edge | None | Left To Right | Blockletters | None | None | None | None | None | Across | None | None |
 |
04 - Dogbone | 3 | Single Cornered Narrow Bottom Edge | None | Top To Bottom | Dogbone | None | None | None | None | None | None | Typed | Left (Bottom To Top) |
 |
11 - Tubeless - No logo inside - corner pip | 13 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | Large (3mm) | Wide Straight 'O' | Across | Typed | Center (Bottom To Top) |
| 19 - Other parts - logo on studs | 1 | Single Cornered Narrow Bottom Edge | None | None | None | None | None | None | None | None | None | Typed | Left + Right | |
| 21 - Old logo - 3mm stud recess - corner-pip | 16 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Top+Bottom (centered) | Normal | Large (3mm) | Wide Straight 'O' | None | Typed | Left (Bottom To Top) | |
| 23 - Old logo - smaller stud recess - corner-pip - no mold-id | 13 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | None | Top+Bottom (centered) | Normal | Small (2-2,2mm) | Wide Straight 'O' | None | Typed | Left (Bottom To Top) | |
| 32 - Old logo - 2x2 with mold identifiers | 7 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | Left (Bottom To Top) | Top+Bottom/Top+Right | Normal | Small (2-2,2mm) | Wide Straight 'O' | None | Typed | Right (Bottom To Top)+Bottom | |
| 33 - Old logo - 2x3 with mold identifiers | 4 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | Left (Bottom To Top) with exception(s) | Top+Bottom (right-aligned) | Normal | Small (2-2,2mm) | Wide Straight 'O' | None | Typed | Right (Bottom To Top) with exception(s) | |
| 34 - Old logo - 2x4 with mold identifiers | 18 | Single Cornered Narrow Bottom Edge | Tubes Without Cross-support | None | None | Left (Bottom To Top) | Top+Bottom (centered) | Normal | Small (2-2,2mm) | Wide Straight 'O' | None | Typed | Right (Bottom To Top) | |
 |
41 - Narrow Straight 'O' 1x6 with mold identifiers | 1 | Single Cornered Narrow Bottom Edge | Cross-support | None | None | Right (Top To Bottom) | None | None | Small (2-2,2mm) | Narrow Straight 'O' | None | Typed | Left (Bottom To Top) |
 |
42 - Narrow Straight 'O' 1x8 with mold identifiers | 2 | Single Cornered Narrow Bottom Edge | Cross-support | None | None | Right (Top To Bottom) | None | None | Small (2-2,2mm) | Narrow Straight 'O' | None | Typed | Left (Bottom To Top) |
01 - Automatic Binding Bricks (1949-1951)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
01a | Automatic Binding Bricks | 5 / 16 |
02 - Large logo - lengthwise ribs (1952-1952)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
02a | Large logo - lengthwise ribs | 3 / 16 |
03 - Large logo - ribs across (1953-1953)
| Photo | CatId | Mold | Members | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
03a | Hatched bricks | 2 / 18 | Across | None | None | None | 03b (Matching pattern (f-1 rotated 180 deg.)),03c (Matching pattern (f-1 rotated 180 deg.)) |
 |
03b | Numbered bricks | 2 / 18 | Across | Top | Hand-written | None | 03a (Matching pattern (f-1 rotated 180 deg.)),03c (Matching pattern (f-1 rotated 180 deg.)),03i (Matching pattern - hand-written number identical) |
 |
03d | With slots | 3 / 8 | Spotted | Top right corner (Top To Bottom) | Typed | None | |
 |
03f | Without slots, but with stud logo | 2 / 4 | Spotted | Top right corner (Top To Bottom) | Typed | Wide Straight 'O' | |
 |
03i | Numbered bricks - variant | 1 / 1 | Across | Top | Hand-written | None | 03b (Matching pattern - hand-written number identical) |
04 - Dogbone (1954-1954)
| Photo | CatId | Mold | Members | InsideLogoOrientation | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | Associations |
|---|---|---|---|---|---|---|---|---|
 |
04a | Overlapping numbers | 6 / 16 | Top To Bottom | None | Left (Bottom To Top) | Typed | |
 |
04c | Circles 2x12+2x14 | 2 / 4 | Left To Right | Across | None | None | |
 |
04d | Circles - 2x2 | 4 / 4 | Left To Right | Across | None | None |
11 - Tubeless - No logo inside - corner pip (1956-1957)
| Photo | CatId | Mold | Members | BottomStyle | InsideRibStyle | MoldPositionLayout | MoldPositionStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
 |
11a | 2x8 Single pip | 4 / 8 | Cross-support | Across | Left (Bottom To Top) | Typed | Large (3mm) | 11b (Matching patterns - only differs by number of pips) |
 |
11c | Unnumbered - sloped stud recesses | 5 / 22 | None | Across | None | None | Large sloped (3mm) | |
 |
11d | 2x4 Centered and mirrored numbers - corner-pip | 1 / 20 | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11j | 2x2 Sloped stud recesses - handwritten numbers | 1 / 28 | None | Across | Center (Bottom To Top) | Hand-written | Large sloped (3mm) | 11k (Matching surface pattern),11l (Matching surface pattern) |
 |
11k | 2x2 Sloped stud recesses - typed weak numbers | 4 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11l (Matching surface pattern) |
 |
11l | 2x2 Sloped stud recesses - typed strong numbers | 4 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11j (Matching surface pattern),11k (Matching surface pattern) |
 |
11m | 2x2 Normal stud recesses | 2 / 28 | None | None | Center (Bottom To Top) | Typed | Large (3mm) | |
 |
11q | 1x2 Sloped stud-recesses | 7 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11r (Matching surface pattern),11s (Matching surface pattern) |
 |
11r | 1x2 Sloped+Normal stud-recess | 9 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | 11q (Matching surface pattern),11s (Matching surface pattern) |
 |
11s | 1x2 Normal stud-recess | 9 / 28 | None | Across | Center (Bottom To Top) | Typed | Large (3mm) | 11q (Matching surface pattern),11r (Matching surface pattern) |
 |
11t | 1x2 Sloped stud-recesses sideways numbers | 2 / 28 | None | Across | Center (Bottom To Top) | Typed | Large sloped (3mm) | |
 |
11w | 2x4 Unnumbered - normal recess | 1 / 5 | None | Across | None | None | Large (3mm) | |
 |
11y | 2x10 Single pip | 3 / 8 | Cross-support | Across | Right (Top To Bottom) | Typed | Large (3mm) | 11p (Matching patterns) |
19 - Other parts - logo on studs (1958-1969)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
| 19s | Garage Door Counterweight with pin | 8 / 16 |
21 - Old logo - 3mm stud recess - corner-pip (1958-1959)
| Photo | CatId | Mold | Members | MoldPositionLayout | Associations |
|---|---|---|---|---|---|
| 21a | 2x4 - Mold number left - pip right | 6 / 14 | Left (Bottom To Top) | ||
| 21c | 2x4 - Mold number right - sharp edges on tubes | 15 / 20 | Right (Top To Bottom) | ||
| 21e | 2x4 - Wide tube-base #1 | 12 / 18 | Right (Top To Bottom) | ||
| 21f | 2x4 - Wide tube-base #2 | 12 / 18 | Right (Top To Bottom) | ||
| 21g | 2x4 - Normal "Pat. pend." #1 | 11 / 20 | Right (Top To Bottom) | ||
| 21h | 2x4 - Normal "Pat. pend." #2 | 7 / 16 | Right (Top To Bottom) | ||
| 21j | 2x4 - Bold "Pat. pend." #2 | 8 / 20 | Right (Top To Bottom) | ||
| 21k | 2x4 - Bold "pend." (normal "Pat") | 5 / 16 | Right (Top To Bottom) | ||
| 21l | 2x4 - Bold "Pat." (normal "pend") | 16 / 20 | Right (Top To Bottom) | ||
| 21m | 2x3 - Pip right - mold 1 | 16 / 20 | Right (Top To Bottom) | ||
| 21n | 2x3 - Pip right - mold 2 | 11 / 16 | Right (Top To Bottom) | ||
| 21q | 2x3 - Pip right - mold 3 (sharp tube edge 1) | 8 / 16 | Right (Top To Bottom) | ||
| 21r | 2x3 - Pip right - mold 3 (sharp tube edge 2) | 8 / 16 | Right (Top To Bottom) | ||
| 21u | 2x2 pip right - horizontal logo | 16 / 28 | Right (Top To Bottom) | ||
| 21v | 2x2 pip left/right - vertical logo | 18 / 28 | Right (Top To Bottom) | 21w (Matching bottom pattern - top rotated (pip + logo)) | |
| 21w | 2x2 pip top - horizontal logo | 1 / 1 | Right (Top To Bottom) | 21v (Matching bottom pattern - top rotated (pip + logo)) |
23 - Old logo - smaller stud recess - corner-pip - no mold-id (1958-1959)
| Photo | CatId | Mold | Members | MoldPositionLayout | MoldPositionStyle | PatPendLayout | PatPendStyle | StudLogoStyle | StudRecessStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|---|
| 23ab | 2x4 - obscured mold id | 1 / 1 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Round 'O' | Small (2-2,2mm) | ||
| 23d | 2x4 - mold id left bottom to top #1 | 1 / 20 | Left (Bottom To Top) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23f | 2x4 - mold id right top to bottom - small pat.pend. | 17 / 18 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Small | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23g | 2x4 - mold id right top to bottom #1 (slightly right-aligned mold.pos.) | 5 / 20 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23h | 2x4 - mold id right top to bottom #2 | 16 / 20 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23i | 2x4 - mold id right top to bottom #3 | 5 / 20 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23l | 2x3 - pip right - weak mold pos | 4 / 20 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23m | 2x3 - pip right #2 | 12 / 18 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | 23n (Matching bottom pattern - but with smaller stud recesses) | |
| 23n | 2x3 - pip right #3 | 14 / 16 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | 23m (Matching bottom pattern - but with smaller stud recesses) | |
| 23o | 2x2 - horizontal stud-logo | 19 / 20 | Right (Top To Bottom) | Typed | Top+Bottom (centered) | Normal | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23p | 2x2 - vertial stud-logo | 25 / 28 | Right (Top To Bottom) | Typed | None | Normal | Wide Straight 'O' | Medium (2,3-2,5mm) | ||
| 23s | 2x2 and 2x3 - without pat.pend/mold-id | 2 / 8 | None | None | None | None | Wide Straight 'O' | Small (2-2,2mm) | ||
| 23y | 2x3 Mirrored handwritten mold pos | 4 / 24 | Right (Top To Bottom) | Hand-written | None | None | Wide Round 'O' | Small (2-2,2mm) |
32 - Old logo - 2x2 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | PatPendLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|
| 32b | 2x2 - B-mold | 22 / 32 | Left (Bottom To Top) | Right (Bottom To Top)+Bottom | Top+Bottom/Top+Right | Wide Straight 'O' | ||
| 32c1 | 2x2 - C-mold 1 - Small mold-id left | 15 / 32 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32c4 | 2x2 - C-mold 4 - Small mold-id left pos removed | 2 / 2 | Left (Top To Bottom) | None | Top+Bottom (centered) | Wide Straight 'O' | ||
| 32d1 | 2x2 - D-mold 1 - Pip right | 22 / 32 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e1 | 2x2 - E-mold 1 - Mold-id top to bottom | 27 / 34 | Left (Top To Bottom) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32e2 | 2x2 - E-mold 2 - Mold-id bottom to top | 26 / 28 | Left (Bottom To Top) | Right (Top To Bottom) | Top+Bottom (centered) | Wide Round 'O' | ||
| 32f | 2x2 - F-mold | 1 / 2 | Right (Top To Bottom) | Left (Bottom To Top) | Top+Bottom (centered) | Wide Round 'O' |
33 - Old logo - 2x3 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|
| 33a | 2x3 - A-mold | 11 / 20 | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Wide Straight 'O' | ||
| 33b1 | 2x3 - B-mold 1 (Normal 'B') | 4 / 18 | Left (Bottom To Top) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33c1 | 2x3 - C-mold 1 (Normal 'C') | 5 / 26 | Left (Top To Bottom) | Right (Top To Bottom) | Wide Round 'O' | ||
| 33c2 | 2x3 - C-mold 2 ('C.') | 2 / 3 | Left (Bottom To Top) | Right (Top To Bottom) | Wide Round 'O' |
34 - Old logo - 2x4 with mold identifiers (1960-1965)
| Photo | CatId | Mold | Members | MoldIdentificationLayout | MoldPositionLayout | MoldPositionStyle | PatPendStyle | StudLogoStyle | Associations |
|---|---|---|---|---|---|---|---|---|---|
| 34a2 | 2x4 - A-mold 2 - Mold identifier left | 4 / 18 | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34c | 2x4 - C-mold | 3 / 20 | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34d1 | 2x4 - D-mold 1 - Small 'Pat. pend.' large 'D' | 9 / 20 | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Small | Wide Straight 'O' | ||
| 34d2 | 2x4 - D-mold 2 - Normal 'Pat. pend.' small 'D' | 7 / 22 | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34e | 2x4 - E-mold | 8 / 22 | Left (Bottom To Top) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34f1 | 2x4 - F-mold 1 - Mold identifier left | 3 / 8 | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | ||
| 34g1 | 2x4 - G-mold 1 | 11 / 22 | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34g2 (Matching pattern - rotated 180 deg) | |
| 34g2 | 2x4 - G-mold 2 - Rotated 180 deg. | 4 / 5 | Left (Top To Bottom) | Right (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34g1 (Matching pattern - rotated 180 deg) | |
| 34h2 | 2x4 - H-mold 2 - Rotated 180 deg. | 2 / 6 | Right (Top To Bottom) | Left (Bottom To Top) | Typed | Normal | Wide Straight 'O' | 34h1 (Matching pattern - rotated 180 deg) | |
| 34j1 | 2x4 - J-mold 1 | 10 / 18 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | 34j2 (Matching pattern) | |
| 34m | 2x4 - M-mold | 8 / 22 | Left (Bottom To Top) | Right (Top To Bottom) | None+Hand-written | Normal | Wide Round 'O' | ||
| 34o1 | 2x4 - O-mold 1 | 10 / 20 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34o2 | 2x4 - O-mold 2 | 3 / 3 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Straight 'O' | ||
| 34r | 2x4 - R-mold | 12 / 18 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34t1 | 2x4 - T-mold 1 | 10 / 20 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34t2 | 2x4 - T-mold 2 - Rotated 180 deg. | 1 / 1 | Left (Bottom To Top) | Right (Top To Bottom) | Typed | Normal | Wide Round 'O' | ||
| 34u | 2x4 - U-mold | 10 / 20 | Left (Bottom To Top) with exception(s) | Right (Bottom To Top) with exception(s) | Typed | Normal | Wide Round 'O' | ||
| 34v1 | 2x4 - V-mold 1 | 1 / 22 | Right (Bottom To Top) | Left (Bottom To Top) | Typed | Normal | Wide Round 'O' |
41 - Narrow Straight 'O' 1x6 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | Associations |
|---|---|---|---|---|
 |
41c1 | Cross support C-mold Corner pip | 3 / 10 |
42 - Narrow Straight 'O' 1x8 with mold identifiers (1958-1970)
| Photo | CatId | Mold | Members | PipStyle | Associations |
|---|---|---|---|---|---|
 |
42c1 | 1x8 Cross support Small hole C-mold Cornered pip | 4 / 10 | Single Cornered Narrow Bottom Edge | |
 |
42c2 | 1x8 Cross support C-mold Centered pip Aligned logos | 1 / 10 | Centered Side Surface |
| Generations | Molds | MoldMembers |
|---|---|---|
| 13 | 85 | 646 |
Color
Angle
Motive
